Lenovo A319: economical, but rather little practical handset. This device often has an error: when it is turned on. It can start to restart endlessly or not start beyond the Lenovo signature that greets the user. But, in fact, these problems are easily solved by changing the firmware of the smartphone. In this article, you will learn how to install Lenovo A319 flash file.
![A319 A319](/uploads/1/2/5/8/125832943/489021073.jpg)
Lenovo A319 flash file requirements
Jul 6, 2018 - Do you want to Install any Custom ROM for Lenovo A319 device? Then you are at the right place. Here we will list all the Custom ROM for.
Before discovering how to install the Lenovo A319 flash file through a computer, you need to install a special program on your PC. With this, you will change the firmware of your smartphone. It’s called flash tool.
Another file to download is itself. Your user can choose independently. On specialized sites or forums, there is a lot of material for this Lenovo, smartphone model.All lenovo firmware download here
![Lenovo Lenovo](/uploads/1/2/5/8/125832943/742647048.jpg)
To know how to flash Lenovo A319, you need to install in Windows, and the driver is for this phone model. You can find it on the web or trust the Windows Update Center, which will find the file and install it.
Lenovo A319 flash file: step-by-step instructions
The first thing to do is remove the battery from the device and do not install it until the flashing is complete. This is a mandatory condition that must be strictly observed.
Second, you must go to the Scatter File section and find the firmware file downloaded to the system. Fourth, It is likely to be signed as “* a model of the smartphone processor (e.g., MT6572) * android_scatter”.
The fifth is to find the block DL DL con cheque sum. This is necessary to give the command to the program that the firmware will be installed on the phone without a battery. Once again, it is worth paying attention to the first step of instruction.
Sixth: go to the “Format,” where you should place the points opposite the AutoFormat Flash graphic and Format the entire flash. You must click “OK” and connect the smartphone via a USB cable to the computer.
The seventh action that the processor will perform on its own. It will format the smartphone. After the initialization and partition process is completed, you must disconnect the smartphone from the cable and click the Download button.
Eighth: you must connect the USB cable to the phone and computer. If the Lenovo driver was not installed, the system will issue an error (and then have to install it in manual mode) or try to find and install it.
Ninth: the process of downloading a new firmware your smartphone began. Once it is installed, the program will show a small window with a green circle: the blinking will be completed. Now he has learned how to flash the Lenovo A319. download all brand without condition linkmtk-rom.com
The result
To install Lenovo A319 flash file, it resulted in no complications. Also, the flashing process itself took quite some time (on average, eleven minutes). But that’s not all: the same principle is used for reflashing and other smartphones. However, do not think that on all devices, the firmware is installed in the same way.
Lenovo A319 flash file firmware Rom
File size: 846.73 MB
CPU: MT6572
File Password: lenovo2
Firmware download
Final thought,
Each manufacturer has its system programming features, which must be taken into account when reinstalling the firmware on the smartphone. For example, in the case of the Lenovo A319 flash file, it is a preliminary elimination of the battery to change the operating system of the device successfully.
View All post for my site
How to Update / Change / Repair Firmware in LENOVO A319 RocStar phones?
Necessary Drivers and Tools
Install Necessary Drivers and Tools
- Unpack Drivers and install it
- Unpack mfasboot_adb by any packer to c:mfastboot
Downloading Necessary Firmware
- First, get the model ID and CID to get the correct firmware. In order to do it, turn on the LENOVO A319 RocStar in the bootloader mode and read all information according to the instructions.
You may also check the model ID by entering the IMEI number on IMEI.info - Once you have model ID and CID, go to Motorola Firmware and select the appropriate model. Then, choose the latest software version(must have the same CID, downgrade not allowed until you not have bootloader unlocked).
- After downloading the software, unpack it using any file archiver and copy all the content of the folder into c:mfastboot where all necessary tools have already been unpacked.
WARNING!
Changing firmware in the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.
Changing firmware in the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.
Firmware Update / Change / Repair in LENOVO A319 RocStar
- Launch thecommand line with admin rights.
- Go to c:mfastboot directory
- Type cd and press enter key.
- Type cd mfastboot and press enter key.
- Check how many system.img_sparsechunk.* files our firmware has. Usually, it is 3 or 4 files.
- Enter the command:
- mfastboot devices and press the enter key
- Type commands one by one and approve each of them by pressing Enter.
- mfastboot.exe oem lock begin
- mfastboot.exe flash partition gpt.bin
- mfastboot.exe flash motoboot motoboot.img
- mfastboot.exe flash logo logo.bin
- mfastboot.exe flash boot boot.img
- mfastboot.exe flash recovery recovery.img
- Depending on the number of system.img_sparsechunk files present in the firmware folder, do the appropriate number of commands, namely 0-3 or 0-4.
- mfastboot.exe flash system system.img_sparsechunk.0
- mfastboot.exe flash system system.img_sparsechunk.1
- mfastboot.exe flash system system.img_sparsechunk.2
- mfastboot.exe flash system system.img_sparsechunk.3
- mfastboot.exe flash system system.img_sparsechunk.4
- Next, type in the following commands:
- mfastboot.exe flash modem NON-HLOS.bin
- mfastboot.exe erase modemst1
- mfastboot.exe erase modemst2
- mfastboot.exe flash fsg fsg.mbn
- mfastboot.exe erase cache
- mfastboot.exe erase userdata
- That's all. Now your LENOVO A319 RocStar has a new firmware. To reboot it from the bootloader mode to the normal mode, use this command:
- mfastboot reboot and press enter key
- Next the LENOVO A319 RocStar phone will restart and switch on in a normal mode. It will take between 10-20 minutes.
Congratulations!
Help! This doesn't work